Features

    • Magnetrol primary low water cut off and pump control
    • MCDM93 float type secondary low water cut off with manual reset float
    • Full modulating firing sequence
    • Flame safeguard control Honeywell 7800 with display
    • Control panel mounted and wired for single point power connection 480/3/60
    • Safety valves set 150 psi – shipped loose
    • Low fire hold
    • Gas train with two motorized valves, HGPS, LGPS, piped and wired
    • Collector pipe for continuous blowdown with conductivity controller and 1/2” metering valve
    • (2) Quick opening blowdown valves – mounted
    • (1) Slow opening blowdown valve – mounted
    • On/Off feedwater control for use with continuous feedwater
    • 122-12 equimeter
    • Feedwater 1-1/2” to 3/4” motorized to 1-1/2”
    • 3” Butterfly valve with 3” gas train
    • 1-1/4” Regulator, 122-8 with 12” x 28” spring
    • 45 amp disconnect mounted
    • 4” Steam outlet
    • Blower motor: 15 hp
    • Max amp load: 105 A

Contact Us